An alternative approach to the structural motion analysis of wedge-beam offshore structures supporting a load     

J. S. Wu  K. -W. Chen 《Ocean Engineering》2003,30(14):1791-1806

For convenience of dynamic analysis, some offshore structures such as fixed-type platforms are often modeled as the wedge beams supporting tip lumped masses. It is well-known that, due to the effect of the surrounding water, the natural frequencies of a beam in air (or dry beam) are different from those of the same beam immersed in water (or wet beam). However, if the natural frequencies and the associated mode shapes of a dry beam are calculated by taking account of the “added mass” for the immersed beam, then the last natural frequencies and mode shapes will be equal to the corresponding ones of the wet beam. Based on the last concept, the closed form solutions for natural frequencies and the associated mode shapes of the dry beam were determined first, then the partial differential equation of motion for the wet beam was transformed into a matrix equation by using the expansion theorem and the foregoing closed form solutions of free vibration responses for the dry beam. Solving the last matrix equation will give the required natural frequencies and the associated mode shapes of the wet beam. The formulation of this paper is available for the fully or partially immersed double tapered beams with either circular, square or rectangular cross-sections. The taper ratio for width and that for depth may be equal or unequal. The numerical results of this paper were compared with the existing results or the finite-element-method results and good agreement was achieved.  相似文献   

我国山地旅游资源特征及可持续开发利用对策探讨   总被引：9，自引：0，他引：9  

郭彩玲 《地域研究与开发》2006,25(3):56-59

山地旅游资源分为自然旅游资源和人文旅游资源。我国山地旅游资源的特色鲜明，不仅旅游资源丰富多样，开发利用潜力巨大，而且大部分山地既是风景区，叉是自然保护区，是开展各种旅游与科考活动的极佳场所。长期困扰我国山地旅游资源开发的主要问题是资金投入不足、交通不便、基础设施落后、管理混乱。近年来，国家和地方有关部门已加大对山地旅游资源开发规划和管理整顿的力度，促使山地旅游资源开发逐步迈上科学、和谐发展的轨道，其特有的价值和经济效益得到初步体现。文章在分析我国山地旅游资源特征、开发优势的基础上，提出了我国山地旅游资源可持续发展的具体对策。  相似文献   

Correct nomenclature for the Angadimogar pluton, Kerala, southwestern India     

H. M. Rajesh 《Journal of Earth System Science》2006,115(2):239-248

The proper usage of modal composition and geochemical classification of granitoids is discussed for assigning a proper nomenclature for the Angadimogar pluton, Kerala, southwestern India. This discussion is mainly aimed at addressing questions concerning the nomenclature of Angadimogar pluton (syenitevs. granite). Modal composition and whole-rock XRD data clearly show that the pluton exposed near Angadimogar is a quartz-syenite and its geochemistry is typical of a ferroan, metaluminous, alkali (A-type) granitoid  相似文献   

Assessing the Vibrational Frequencies of the Cathedral of Cologne (Germany) by Means of Ambient Seismic Noise Analysis   总被引：1，自引：0，他引：1  

Andreas Fäcke  Stefano Parolai  Sandra M. Richwalski  Lothar Stempniewski 《Natural Hazards》2006,38(1-2):229-236

Ambient seismic noise measurements were conducted inside the Cathedral of Cologne (Germany) for assessing its frequencies of vibration and for checking whether these occur in the range where soil amplification is expected. If this is the case, damages may increase in case of an earthquake due to an increased structural response of the building. Analysis of the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building as well as the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed in the basement of the cathedral indicated several modes of vibration. Facilitated by these results an assessment of the seismic vulnerability was attempted for a 2D ground motion scenario using the finite element method.  相似文献   

Optimal placement of dampers and actuators based on stochastic approach     

Franklin Y. Cheng  Hongping Jiang  Xiaozhe Zhang Ph.D. Candidate 《地震工程与工程振动(英文版)》2002,1(2):237-249

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Hilbert-Huang变换在密频结构阻尼识别中的应用   总被引：14，自引：3，他引：14  

陈隽  徐幼麟  李杰 《地震工程与工程振动》2003,23(4):34-42

Hilbert—Huang变换是一种新的数据处理方法，由经验模分解(Empirical Mode Decomposition)技术及Hilbert变换两部分组成。本文研究此方法对于密频结构阻尼识别的应用。首先对于两自由度系统模型，说明该方法用于阻尼识别的步骤。进而研究存在频率密集现象的高层建筑的阻尼识别问题。上述结果与理论值及由半功率带宽法的识别值进行了比较，对比显示Hilbert．Huang方法较传统方法具有良好的识别密频结构阻尼的性能，适用于大型结构的系统识别。  相似文献   

On the Incorporation of the Effect of Crustal Structure into Empirical Strong Ground Motion Estimation     

J. Douglas  P. Suhadolc  G. Costa 《Bulletin of Earthquake Engineering》2004,2(1):75-99

This article has two purposes. Firstly, a validation exercise of the modal summation technique for the computation of synthetic strong-motion records is performed for two regions of Europe (Umbria-Marche and south Iceland), using a variety of region specific crustal structure models, by comparing the predicted ground motion amplitudes with observed motions. It is found that the rate of decay of ground motions is well predicted by the theoretical decay curves but that the absolute size of the ground motions is underpredicted by the synthetic time-histories. This is thought to be due to the presence of low-velocity surface layers that amplify the ground motions but are not included in the crustal structure models used to compute the synthetic time-histories. Secondly, a new distance metric based on the computed theoretical decay curves is introduced which should have the ability to model the complex decay of strong ground motions. The ability of this new distance metric to reduce the associated scatter in empirically derived equations for the estimation of strong ground motions is tested. It is found that it does not lead to a reduction in the scatter but this is thought to be due to the use of crustal structure models that are not accurate or detailed enough for the regions studied. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Dynamic performance of twin curved cable‐stayed bridges     

C. Gentile  F. Martinez y Cabrera 《地震工程与结构动力学》2004,33(1):15-34

The dynamic behaviour of two curved cable‐stayed bridges, recently constructed in northern Italy, has been investigated by full‐scale testing and theoretical models. Two different excitation techniques were employed in the dynamic tests: traffic‐induced ambient vibrations and free vibrations. Since the modal behaviour identified from the two types of test are very well correlated and a greater number of normal modes was detected during ambient vibration tests, the validity of the ambient vibration survey is assessed in view of future monitoring. For both bridges, 11 vibration modes were identified in the frequency range of 0ndash;10Hz, being a one‐to‐one correspondence between the observed modes of the two bridges. Successively, the information obtained from the field tests was used to validate and improve 3D finite elements so that the dynamic performance of the two systems were assessed and compared based on both the experimental results and the updated theoretical models. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Frequency domain modal analysis of earthquake input energy to highly damped passive control structures     

Izuru Takewaki 《地震工程与结构动力学》2004,33(5):575-590

A new complex modal analysis‐based method is developed in the frequency domain for efficient computation of the earthquake input energy to a highly damped linear elastic passive control structure. The input energy to the structure during an earthquake is an important measure of seismic demand. Because of generality and applicability to non‐linear structures, the earthquake input energy has usually been computed in the time domain. It is shown here that the formulation of the earthquake input energy in the frequency domain is essential for deriving a bound on the earthquake input energy for a class of ground motions and for understanding the robustness of passively controlled structures to disturbances with various frequency contents. From the viewpoint of computational efficiency, a modal analysis‐based method is developed. The importance of overdamped modes in the energy computation of specific non‐proportionally damped models is demonstrated by comparing the energy transfer functions and the displacement transfer functions. Through numerical examinations for four recorded ground motions, it is shown that the modal analysis‐based method in the frequency domain is very efficient in the computation of the earthquake input energy. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献